Difference between revisions of "QB64 FAQ"

From QB64 Wiki
Jump to navigation Jump to search
(→‎Q: Why isn't the IDE always working as I would expect?: Broken links removed. Text reworded in sync with current development.)
Line 622: Line 622:
==Q: Why isn't the [[IDE]] always working as I would expect?==
==Q: Why isn't the [[IDE]] always working as I would expect?==

A: The [[IDE]] is currently being worked on, but it has a lower priority than the compiler (for obvious reasons), syntax checking isn't always working as you would expect, etc., Galleon knows about these issues and makes effort to resolve them in due time. The compiler is priority number one though and the [[IDE]] will be improved as warranted.  
A: The [[IDE]] has many features shared with modern IDEs while retaining the retro look reminiscent of QuickBasic 4.5 and QBasic. You may request new features in the Discussion subforum and they will be analyzed for implementation, although no warranty of being added is made.

<center>'''WARNING! You may need Administrator rights to install or use QB64!'''</center>
You can also use QB64 as a compiler only, so that you can choose any alternate editor of your choice.
<center>'''You may need Administrator rights to install or use QB64'''</center>

Line 630: Line 632:

<center>[http://www.qb64.net/forum/index.php?board=3.0 Report Compiler Bugs here!]
<center>[http://www.qb64.net/forum/index.php?board=21.0 Report missed Syntax Errors here!]</center>
[http://www.qb64.net/forum/index.php?board=21.0 Report missed Syntax Errors here!]</center>

Line 640: Line 639:

<p style="text-align: center">([[#toc|Return to FAQ topics]])</p>
<p style="text-align: center">([[#toc|Return to FAQ topics]])</p>

==Q: If QB64 creates Basic programs why is there no Immediate Window?==
==Q: If QB64 creates Basic programs why is there no Immediate Window?==

Revision as of 20:32, 30 August 2017

As with everything else, this list will be updated to correspond to new progress of QB64 so make sure that you are using the latest version of QB64 (version 1.1 released in 1/20/17). Please note that it may take a short time to update this list.

You may need Administrator rights to install or use QB64!
It's a good idea to exclude "QB64.exe" (also the internal folder) from any real-time anti-virus scanning to prevent IDE Module Errors!

Q: What is QB64?

A: QB64 is a BASIC compatible Editor and C++ compiler that creates working Executable files from Qbasic BAS files that can be run on 32 or 64 bit PC's using WINDOWS(XP, Vista and newer), LINUX or macOS. The goal is to be 100% compatible with QuickBasic 4.5 plus add hundreds of new abilities such as program icons and custom sized windows and a great Editor with a new Help Menu.

The new keywords add some new features such as playing music or sound files and instant access to 32 bit graphics file images. Also TCP/IP internet communication is available to download files, email messages over the web or play internet games. DLL Libraries can add more programming options and QB64 can access all of the new USB gaming controllers and printers.

QB is an abbreviation for QBasic or QuickBASIC which is an easy to learn language that grew very popular in the 90's. It uses simple syntax but holds great potential as there are methods to achieve nearly anything. QBasic is NOT DEAD thanks to QB64!

Keywords currently not supported by QB64

You may need Administrator rights to install or use QB64!

Q: Does it have modern features? Do they HAVE to be used?

A: QB64 has PLENTY of modern features, but they do not have to be used. You may just want to run some of your old favorites.

QB64 was created to run your old Qbasic 4.5(or less) programs on newer Operating Systems without ANY changes!

You could code using the original QuickBASIC syntax all the way through and it should work as you expect it to or even better. QB64 is often faster and has none of the memory limitations that plagued Qbasic in the past! Give it try! See for yourself.

For incompatibility issues you can look in the QB64 "Discussion" board here:

Visit the QB64 Community Forum

Some members can still run QB4.5 programs so we can test problem code!
QB 4.5 code only! QB64 was not meant to run PDS(7.1) QBX code. Will run most GW Basic code too!

If your program(s) don't work correctly(check your code first) please feel free to post in the "Discussion" board.

Galleon is constantly working on pure compatibility. You don't have to set it up differently to use the modern features as they are made to work alongside original QB code seamlessly (unlike FreeBASIC and any other modern BASIC out there). The modern statements are designed to go along with the BASIC philosophy and expand Qbasic into the future!


1) Full graphic functions for images up to 32 bit color. Alpha transparency supported. 2) Instant loading of image files including BMP, PNG, JPEG, GIF and more... 3) Supports stereo sound files like WAV, OGG, MP3, speaker and volume control and more... 4) Animation is easy to do using _DISPLAY instead of page flipping. NO SCREEN FLICKER! 5) Clipboard reading and writing support. 6) Networking over TCP/IP Message Format and Email. 7) True type font and Unicode support for many Languages. 8) Integrated mouse and game controller input including scroll wheel support. 9) Support for C++, OpenGL, Windows API and other custom Dynamic Link Libraries.

(Return to FAQ topics)

Q: How do I install QB64 on Windows, Linux, macOS or run programs in Android?

A: If you have a relatively new computer you will probably be fine. QB64 supports the following Operating Systems in one download:

Windows NT(XP), Windows Vista, Windows 7, 8 or 10:
1) Click the following link and Windows box to download QB64: QB64 Windows Downloads
2) Unzip to any folder path you wish. The ZIP file will create a QB64 folder for the program files.
  • Executable programs are portable between like systems by copying the stand-alone executable file.
  • Versions of QB64 prior to 1.000 require that your binary is distributed with the DLL files that came bundled.
You may need Administrator rights to install or use QB64.

Windows 2000 running QB64 versions .94 and Above
QB64 version .940 and above contain a full version of the Ming Compiler! This may create an entry point error in Windows 2K.
1) Click the following link and Windows box to download QB64: QB64 Windows Downloads
2) Unzip to any folder path you wish. The ZIP file will create a QB64 folder for the program files. Check for MSVCRT.DLL errors!
3) If there is an error, unzip the contents of the ZIP FIX file into the QB64 folder after QB64 has updated to the latest version.
Download ZIP FIX for Windows 2000 if QB64 does not run correctly!
This download fix will be updated when necessary by Dav

Most versions of LINUX 32 and 64 bit
1) Click on the following link and Linux box to download QB64: QB64 Linux Downloads
2) You will need the following installed: OpenGL developement libraries, ALSA development libraries, GNU C++ Compiler (g++)
3) After extracting the downloaded package, run the installation batch/script called setup_lnx.sh in the main qb64 folder to setup QB64.
4) It is not advisable to install QB64 as root.
Executable programs are portable between like systems by copying the executable file.
The Linux 32bit & 64bit versions are combined as of the v 0.925 update
Note: Some QB64 keywords and procedures are not available as of this Linux release.

(Return to FAQ topics)

1) You MUST install Xcode command line tools for C++ compilation from their website. In a terminal window, type the following command: xcode-select --install (more info here: Xcode.html download)
    (you won't be using the Xcode interface, QB64 just needs to have access to the C++ compiler it installs)
3) Click on the following link and MAC OSX box to download QB64 for macOS: QB64 MAC OSX Downloads
    Extract the downloaded package and run setup_osx.command, found within the QB64 folder to install the QB64 compiler.
After installation you should run qb64_start_osx.command to run qb64.
  • Executable programs are portable between like OSX systems by copying the executable file.
  • To help launch executables without a console, a file called programname_start.command is created along with the program.
Note: Some QB64 keywords and procedures are not available as of this MAC release.

Keywords Not Supported in Linux or MAC OSX versions

References to Android in QB64 refer to the Android Experiment. More information here: Android QB64 (may be outdated/non-functional)

(Return to FAQ topics)

Q: How do I upgrade the 32 bit Windows version of QB64 to 64 bit functionality?

A: The process has been simplified a lot recently.

  1. Download the version of QB64 which you want to transform into a 64-bit version from THE QB64 OFFICIAL WEBSITE.
  2. Grab a pre-edited copy of the 64-bit mingw compiler. You can find it here, QB64 64-bit mingw compiler (08-01-2017) PRE-EDITED, stored permanently in Steve McNeill's Dropbox account.
  3. Extract the QB64 file wherever you want it to be on your system.
  4. Go into the folder where you installed QB64 and head to the internal/c/c_compiler folder.
  5. Delete everyone of those files and folders.
  6. Extract the mingw 64-bit compiler into that folder. You're looking to replace the old contents with the new contents. Watch for nesting a folder inside a folder by accident.
  7. Go into the main QB64 directory, look for setup_win.bat. If it's not there, grab the download for it from below and put it into the main folder. (I don't think the archives at qb64.net has the file included in it, though if you download from the repo directly, you can find it. It's kind of a developer tool, moreso than something an user needs cluttering up their directory structure.)
  8. Run that setup_win.bat file. If everything is extracted to the proper places, you should build and have a version of QB64 open up where the title screen now reads "QB64x64". Congrats!! You now have a working, 64-bit version of QB64.

That's all it takes!

Tip courtesy of Steve McNeill

(Return to FAQ topics)

Q: Why won't QB64 work on my computer?

QB64 currently supports Windows versions from XP to the latest version. Most Linux and macOS versions are also supported.

Don't move QB64 executable out of the QB64 folder! The various sub-folders hold the C++ compiler files!
Versions of QB64 prior to 1.000 require the accompanying DLL files, which may be copied into the Windows System32 or SysWOW64 folder for program access outside of the QB64 folder. They can also be placed in a separate folder or download package with the EXE and program files.

Does your Windows system have another version of the MinGW compiler? Does it have Fortran or GFortran? You can check your environmental values using the following batch file which will create the settings.inf text file in the batch folder:

set >settings.inf

The settings.inf file should hold environmental values similar to those listed below:

ALLUSERSPROFILE=C:\Documents and Settings\All Users.WINDOWS APPDATA=C:\Documents and Settings\User1\Application Data CLIENTNAME=Console CommonProgramFiles=C:\Program Files\Common Files COMPUTERNAME=PC1 ComSpec=C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK=NO HOMEDRIVE=C: HOMEPATH=\Documents and Settings\User1 LIBRARY_PATH=\F\G77\Llib LOGONSERVER=\\PC1 NUMBER_OF_PROCESSORS=1 OS=Windows_NT Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;\F\G77\bin PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE=x86 PROCESSOR_IDENTIFIER=x86 Family 15 Model 1 Stepping 2, GenuineIntel PROCESSOR_LEVEL=15 PROCESSOR_REVISION=0102 ProgramFiles=C:\Program Files PROMPT=$P$G SESSIONNAME=Console SystemDrive=C: SystemRoot=C:\WINDOWS TEMP=C:\DOCUME~1\User1\LOCALS~1\Temp TMP=C:\DOCUME~1\User1\LOCALS~1\Temp

Environmental values in red above indicate where another C compiler has altered or added to the Windows settings.

Environmental values to check and possibly clear are PATH=, LIBRARY_PATH=, LIB= or CPLUS_INCLUDE_PATH=

QB64 does NOT alter computer settings! All required files are organized in the QB64 folder.

Try to run the following TestQB64.bat batch file from the QB64 folder only:

@echo off REM set environmental values for QB64. Remove offending program paths from the values. set Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem set LIBRARY_PATH= REM start QB64 IDE. A BAS file can be dropped into this batch file to edit in IDE. REM this batch file must be run from the QB64 folder! Set QB64=%~dp0 CD "%QB64%" start qb64.exe %1

Adapted from code by Michael Calkins
64 bit systems should use the PATH=C:\WINDOWS\SysWOW64 folder in place of the C:\WINDOWS\system32 parameter.

If the batch file works, you can use it to edit and compile QB64 programs. You may want to uninstall the conflicting program.

IDE Compiler Errors

(Return to FAQ topics)

Q: Are there any known incompatibilities?

A: There are some things that QB64 will not and NEVER was intended to do! The original concept was and is to provide a platform that allows older and NEW QBasic procedures and programs to run on the newer 32 and 64 bit personal computers. As you may have observed, this compatibility alone limits the access programs now have to DOS.

DOS is not fully supported, as this will require full DOS support to be emulated, however it will continually be updated to support more source code and more features, memory addresses, ports, etc. so that it always approaches 100%. If you don't use too many ABSOLUTE, INTERRUPT, PEEK, POKE and OUT statements you probably won't notice any difference between QB 4.5 and QB64 (and if you do, report it as a bug in the forums, remember to check if the problem has been reported before please!), you can expect the most common addresses for interrupts, etc. to be functioning. Galleon has also received a comprehensive list of memory and port addresses so that even some less common addresses may work as well. If you are unsure, try them!

Keywords currently not supported by QB64

Watch the CPU usage! QB64 is a lot faster than QBasic was and it does not have many of the size limitations that confined QBasic programming abilities. Having said that, care must be taken to assure that programs do not HOG resources! To do that, use speed limits when possible to keep the resources used to a minimum. Monitor Task Manager! It can tell you how much resources are being used in different parts of a program. The following keywords can lower the impact of your programs on those resources by releasing them to other programs:

  • _LIMIT: Limits the loops per second in ANY loop and thus lowers the overall CPU usage.
  • _DELAY: Pauses a procedure and releases unused resources for other programs.
  • SLEEP: Stops or delays program procedures and shares resources.
  • INPUT and INPUT$ stop program procedures until an entry or key press is given.

QB64 can be fast when you need it to be, but take the time to consider the impact of your program on other programs as people SELDOM have only ONE program running and the OS has tasks it MUST do too! The following programs have KNOWN issues with high CPU usage:

WINAMP (intermittent sound)

Thank you for your support and happy programming!

(Return to FAQ topics)

Q: Why won't my QB64 compiled programs run in folders other than the QB64 folder?

A: Versions of QB64 prior to 1.000 required certain DLL files to be in the program folder or in the Windows system path.


Copy each of the DLL files included with QB64 to the System32 or SysWOW64 folder. You may need administrator rights to do this!

SysWOW64 and Program Files(x86) folders on 64 bit Windows OS.

List of required QB64 DLL files for older versions (prior to 1.000)

(Return to FAQ topics)

Q: How do I find the current QB64 program path in Windows or Linux?

  • With the _CWD$ and _STARTDIR$ commands you can get the current working path and the path from which your program was started, respectively. For older versions of QB64 in which these statements may not be available, use the procedures below.

Windows path:

PRINT PATH$ END FUNCTION PATH$ ' Get Current Directory 'Get path to executable in Windows DECLARE LIBRARY 'Directory Information using KERNEL32 provided by Dav FUNCTION GetModuleFileNameA (BYVAL Module AS LONG, FileName AS STRING, BYVAL nSize AS LONG) END DECLARE FileName$ = SPACE$(400) ' Sometimes 256 characters for a full path name is not enough Result = GetModuleFileNameA(0, FileName$, LEN(FileName$)) '0 designates the current program IF Result THEN 'Result returns the length or bytes of the string information PATH$ = LEFT$(FileName$, Result) start = 1 DO posit = INSTR(start, PATH$, "\") IF posit THEN last = posit start = posit + 1 LOOP UNTIL posit = 0 PATH$ = LEFT$(PATH$, last) ELSE PATH$ = "" END IF FileName$ = "" END FUNCTION

Code by EricR

Linux path:

PRINT path$ END FUNCTION path$ 'Get path to executable and directory of said executable on Linux 'Public Domain code DECLARE LIBRARY FUNCTION readlink& (path$, buffer$, BYVAL bufsize&) END DECLARE bufsize& = 500 'Initial size of the string to store the result in DO buffer$ = SPACE$(bufsize&) 'Create the buffer to put result in ret& = readlink&("/proc/self/exe", buffer$, bufsize&) '/proc/self/exe is always a symlink to our executable file IF ret& < bufsize& THEN EXIT DO 'ret& is how many bytes were actually put in the buffer. If they are equal, we need to make the buffer bigger and try again bufsize& = bufsize& + 500 LOOP exe$ = LEFT$(buffer$, ret&) 'exe$ is now the full path of the executable. 'This code just chops off the filename to give us the directory: FOR i& = LEN(exe$) TO 1 STEP -1 IF MID$(exe$, i&, 1) = "/" THEN EXIT FOR NEXT i& directory$ = LEFT$(exe$, i&) path$ = directory$ END FUNCTION

Code by Johny B

(Return to FAQ topics)

Q: How do I update the information in QB64 HELP?

A: The help provided in the QB64 IDE Help System fetches the pages from this wiki. Use the Update current page in the IDE Help menu selection to update a page. Use the Update all pages choice to update them all, but this may take longer. In general you may want to update monthly or a week after a new version release.

QB64 IDE Help Menu

Q: Can I use the same libraries with QB64 that I used with QB 4.5?

A: If the libraries are pure QB 4.5 code then yes, otherwise no. QLB files are not supported but you can easily copy your favorite SUBs or FUNCTIONs to a text BI file and $INCLUDE them at the end of ANY program. Include them AFTER all SUB and FUNCTION code in the BAS file!

As of Dec 3, 2010 QB64 acquired DECLARE LIBRARY to allow users to reference C, Windows, OpenGL and other DLL libraries. If you find some functions that you like please share them with us at the forum! The following pages list working functions our members have found and tested:

C Libraries, DLL Libraries, Windows Libraries

  • SDL Libraries (obsolete since version 1.000 - available here for historic purposes)

(Return to FAQ topics)

Q: I can't get my QB 4.5 sourcecode to work in QB64! Why?

A: Perhaps that is because QB64 isn't 100% compatible yet, it is a work in progress. It is around 95-98% compatible right now, and that is a large number! The commands that haven't been implemented are either obsolete or are too obscure and have been replaced by modern functionality. Look at the Unimplemented Qbasic Commands Forum for statements that are not available.

Keywords currently not supported by QB64

Compiler errors are another subject. Always try to test the program in Qbasic BEFORE trying to run or compile it in QB64! You may find syntax or other code errors that the QB64 IDE may not find yet as a bonus! Always check the code before blaming QB64!

You may need Administrator rights to install or use QB64.

(Return to FAQ topics)

Q: What files are required to run my QB64 compiled program in my Operating System?

A: Programs compiled by QB64 (version 1.000 and up) are stand-alone so no external OpenGL DLL files are required to be with your program EXE file.

(Return to FAQ topics)

Q: How are foreign languages and keyboards supported in QB64?

A: As of version 0.922 (October 20, 2010) QB64 supports foreign language keyboard characters.

  • Setting up a typing language in the QB64 IDE:
Step 1: In the OPTIONS menu select DISPLAY, then check the CUSTOM FONT check-box.
Step 2: In the OPTIONS menu select LANGUAGE, then select a Code Page (CP850 for example) and click OK.

See the Unicode page to setup a language in a program you create. There are also links to the various Code Pages that are supported. Also there are four new keywords to work with keypresses and map them to ASCII key character codes:


You can now re-assign key codes to Unicode characters in programs you create using the _MAPUNICODE statement!

If you have any problems, post in the discussion board. In the meantime you can use any of these recommended ASCII methods:

Using ASCII Characters

Perhaps you can use the ASCII character codes. Go to the ASCII character chart and look for the character(s) you need. If you find them, remember the code number and use either CHR$(code%) or the Alt-number pad key method to type them into literal strings(real strings with quotes) only. The following QB64 program displays the characters available on your PC:

SCREEN _NEWIMAGE(800, 600, 256) font$ = "C:\WINDOWS\Fonts\cour.ttf" 'TTF file in Windows style$ = "monospace" 'font style f& = _LOADFONT(font$, 22, style$) _FONT f& COLOR 11 FOR c% = 1 TO 6: PRINT c%; CHR$(c%);: NEXT FOR c% = 14 TO 27: PRINT c%; CHR$(c%);: NEXT FOR c% = 32 TO 255: PRINT c%; CHR$(c%);: NEX DO: SLEEP: LOOP UNTIL INKEY$ <> ""

The ALT Key Method: Hold the Alt key down and enter the code number using the Number Pad only. When you release the Alt key, the character should be in the IDE string you are making. Characters can be added (concatenated) using the + between the literal string and CHR$(code) or by using a semicolon as shown below:

PRINT CHR$(165) + "ormally I don't use these keys. Do You " + CHR$(168) 'concatenation PRINT CHR$(165); "ormally I don't use these keys. Do you"; CHR$(168) 'semicolons PRINT "Ñormally I don't use these keys. Do you¿" 'Alt-number pad method

Ñormally I don't use these keys. Do you¿

NOTE: You MUST use concatenation when defining a string variable using the CHR$ function character returns!
Link to the ASCII Character Table

To cut down on typing CHR$(???) all day, define often used characters as string variables such as Q$ = CHR$(34) as shown below:

DIM Q AS STRING * 1 'define as one byte string(get rid of $ type suffix too) Q = CHR$(34) 'Q will now represent the elusive quotation mark in a string PRINT "This string uses "; Q; "quotation marks"; Q; " that might cause a syntax error!"

This string uses "quotation marks" that might cause a syntax error!

Warning! Do NOT use Notepad for special characters as it won't display them! It is best to enter them in the IDE.

You can use ANY of the ASCII characters to add borders, arrows, and many other characters not available on the keyboard. Hopefully this information will cure your problem!

(Return to FAQ topics)

Q: MUST I copy or drag ALL of my program files to the QB64 folder?

A: You can instruct QB64 to save the resulting executable file to the same folder as your source code file so that all your project files can reside in a separate folder, for better organization. In the IDE of versions 1.000 and up, go to the Run menu and tick the option "Save EXE in the source folder". This way, next time you hit F5, Ctrl+F5 or even F11, QB64 will compile your .BAS file and the .EXE will be placed in the same folder.

For older versions of QB64, you can use a batch file, as instructed below:

  1. Use a batch file or a command line as follows: QB64 -c yourfile.BAS
  2. Move the compiled EXE file back to the folder with the program files.
  3. Copy ALL of the QB64 DLL files from the QB64 folder to your new program's folder.
  4. Try the EXE file to see how it works.

The Answer to the Question below will show you how to create a batch file and compile BAS files from ANY location.

(Return to FAQ topics)

Q: Is there a way to use the compiler without running my program or using the IDE?

A: Yes! No other program files besides the BAS file are required! Use the following command to compile a program without running it:

  • QB64 -c yourfile.BAS
  • QB64 -x yourfile.BAS (compiles using the console only)
  • QB64 -c yourfile.BAS -o destination_path\destination executable_name.exe (compiles the .BAS file and outputs the executable to a separate folder)

NOTE: Versions of QB64 prior to 1.000 require that the DLL libraries are copied along with your executable or installed in the System folder (Windows).

The batch file below can compile any BAS file from any location using drag and drop. The EXE will be created in the QB64 folder:

@ECHO OFF Set QB64=%~dp0 Echo. QB64 path: %QB64% REM The QB64 path must designate the drive letter when compiling from another drive letter! C: CD\ CD "%QB64%" cmd /c start /low QB64.exe -c %1

Place the BAT file in the QB64 folder! You will also be able to drag and drop BAS files onto the batchfile.

Associating the batch file in the Right Click Open With pop-up menu

You can associate the batch file to the Right Click Popup Menu's Open With dialogue choices when you right click ANY BAS file:

1) Right click any BAS file and move to Open With and click Choose Program in the pop-up menu.
2) Your batch file will not be in the program choices so select Browse.
3) Navigate to the batch file in the QB64 folder and click on it.
4) Make sure that the Always use this program box is NOT checked! Then save your choice.
The compiled EXE file can be found in the QB64 folder!

You may need Administrator rights to install or use QB64.

(Return to FAQ topics)

Q: How do I LINK modules or INCLUDE SUB procedures in QB64?

A: QB64 allows you to $INCLUDE code or BAS modules into one module when it is compiled. Text .BI files containing SUB or FUNCTION code or entire BAS modules can be included in one module that will be compiled.

After the EXE is compiled, you do not have to even use the added code anymore! The EXE will contain ALL of the program code as ONE stand-alone program! This also allows you to add SUB code to ANY program that you desire. Use the following syntax and rules:

Syntax: REM $INCLUDE: 'filename.BI'

1) $INCLUDE TYPE definitions or DATA field code at the beginning of the module that will be compiled. Text code can be used, but must be renamed to .BI (cannot be a .TXT extension!) or kept as a .BAS module. SUB or FUNCTION code MUST be included at the end of the module code!
2) $INCLUDE SUB or FUNCTION code AFTER any SUB or FUNCTION code in the module that will be compiled to combine them. Otherwise QB64 will create an error stating that the INCLUDE statement cannot be placed there.
3) LINKING of program modules is accomplished by creating a NEW module and using an $INCLUDE statement for each module that is to be combined.

After you have created the include files, you can add them to ANY other program that requires them! Thus you will end up with smaller BAS files and SUB procedures that can be used over and over like libraries. The files are only used during a compilation.

Program to Convert LINKed or Merged multiple module programs into one QB64 Module

(Return to FAQ topics)

Q: CHAIN doesn't work the way I'm used to...

A: CHAIN has been implemented in QB64 versions 0.851 up. Be sure to download the latest version of the compiler when available.

Note: QB64 will automatically compile the named BAS file if it does not find the EXE file.

The statement also can use COMMON or COMMON SHARED to pass program information. However QB64 uses files to pass the information. If your program moves to a location other than the EXE file's location, the file may be inaccessable! To avoid this problem, make sure that your program can refer to that location using a path.

There are minor differences from QBasic in that it doesn't open a program in the same window and does not retain the previous screen mode or format.

(Return to FAQ topics)

Q: Some screens look small. Can I enlarge them or make them fullscreen?

  • You can use the _FULLSCREEN statement to make your programs run fullscreen.
  • $RESIZE can be added to a program so you can track window resize events. (version 1.000 and up)
  • You can also create custom sized screens with page flipping and up to 32 bit colors using _NEWIMAGE.
  • Page flipping is available in most screens and the new _DISPLAY feature allows the images to be displayed when YOU desire.
  • Picture or image files such as BMP, PNG, JPEG and GIF are EASY to load using _LOADIMAGE.
  • Once images are loaded, all you have to do is use the image handle with any of the new statements and functions.
  • _PUTIMAGE GETs and PUTs images fast in ONE call. It can even stretch or compress the image sizes!

(Return to FAQ topics)

Q: Can I have background music as well as SOUND, PLAY and BEEP?

A: Yes, they are emulated to use the soundcard instead of the old boring monotone PC-speaker that is rapidly disappearing.

There also are a bunch of new sound capabilities that allow the use of WAV, OGG, MP3 files and more.

Capabilities include:

  1. Multiple sound tracks
  2. Volume and speaker control
  3. Background music

Get started with MUSIC NOW!

_SNDCLOSE (statement), _SNDCOPY (function), _SNDGETPOS (function), _SNDLEN (function), _SNDLIMIT (statement)

_SNDLOOP (statement), _SNDOPEN (function), _SNDPAUSE (statement), _SNDPAUSED (function), _SNDPLAY (statement)

_SNDPLAYCOPY (statement), _SNDPLAYFILE (statement), _SNDPLAYING (function), _SNDSETPOS (statement)

_SNDRAW (statement), _SNDSTOP (statement), _SNDVOL (statement)

(Return to FAQ topics)

Q: Can I use multiple monitors or Pole Monitors?

A: Yes, program windows can be moved to them automatically using _SCREENMOVE with horizontal pixel values that are negative for a secondary monitor on the left and greater than the screen resolution for secondary monitors on the right.

Note: If _FULLSCREEN is used the program will appear in the primary monitor only. Other running program windows may be pushed onto a secondary monitor on the right so a secondary monitor on the left is preferable in those circumstances.

(Return to FAQ topics)

Q: Why isn't the IDE always working as I would expect?

A: The IDE has many features shared with modern IDEs while retaining the retro look reminiscent of QuickBasic 4.5 and QBasic. You may request new features in the Discussion subforum and they will be analyzed for implementation, although no warranty of being added is made.

You can also use QB64 as a compiler only, so that you can choose any alternate editor of your choice.

You may need Administrator rights to install or use QB64

Alternate Editors: PSPad Editor for Windows and Gedit Editor for Linux

Report missed Syntax Errors here!

Known QB64 Issues

(Return to FAQ topics)

Q: If QB64 creates Basic programs why is there no Immediate Window?

A: Because there is no QB64 interpreter. All C code has to be compiled before it can be run, but you can run more than one instance.

QB64 uses the Immediate window area to suggest syntax for keyword entries and give the compiler status when compiling. To run code snippets or do program calculations using QB64 just open up another instance of the IDE. Each new instance of QB64 will create a new numbered instance of Untitled(n).exe when compiled. If you want to save the test code for later use, Save it as a BAS file name before closing that instance of QB64. Ihe IDE will always ask if you want to save new or edited code.

Qbasic and Quickbasic allowed BAS programs to be run in an interpreter to test the code. The Run Menu will allows the following:

Start F5 Compiles into EXE file and runs program(with code whiteout). ─────────────────────────── Start (Detached) Ctrl+F5 Compiles into EXE and runs program separately (no code whiteout). Make EXE Only F11 Compiles into EXE without program files if there are no errors. ─────────────────────────── Make Android Project GL Compiled program as Android project(enabled in Options)

Function keys compile without entering menu

White letters indicate CTRL + letter shortcuts when inside Run menu

Associated text $INCLUDE code files, LIBRARY DLL files and C++ .h header files must be in the QB64 folder to compile.

Only the associated DLL files need to be included with the program EXE after it is compiled.

(The compiler can find Windows DLL files in the System folder and C++ DLL files in the QB64 folder.)

No additional program files need to be in the QB64 folder to Make EXE Only!

The compiled EXE file can then be moved to a different folder holding the program files necessary when it is run.

(Return to FAQ topics)

Q: How can I slow my program down and/or use less CPU resources?

Not by using FOR loops! It would take a lot of loops just to slow QB64 down! Try _LIMIT to slow your program down and run at the same frame rate every loop. The integer value you enter determines the loop rate whether it is a DO...LOOP or a FOR...NEXT loop.

_LIMIT also keeps the CPU memory usage lower when used correctly. Use Task Manager or another CPU manager to monitor the percentage of use if it is over 50% and it doesn't need to be. Some QB64 programs can take up over 90% of the memory needed!

Use SLEEP or INPUT$ to wait for user entries, key presses or menu selections rather than using running INKEY$ loops too.

(Return to FAQ topics)

Q: Can I resize the QB64 Editor(IDE)?

A: Yes, use the Alt + Enter key combination to switch from windowed to full screen mode. This can also be used to resize a QB64 program screen!

There is also a way to set the window size in the Options Menu. Select Display and change the size from 80 columns and 25 rows to a larger size. The size cannot be less than 80 by 25! The size denotes the TEXT column and rows only! DO NOT MAKE IT TOO LARGE!

If there is ever a problem with an OPTION that you set, just Delete the .\internal\temp\options.bin file. Then restart QB64. You can find the program listed in the taskbar. Right click and select Close from the pop-up menu.

See the IDE Page for more information.

Q: The autoformatting doesn't work correctly in the IDE...

A: The autoformatting only has minor bugs which doesn't alter the actual execution of the code in any way, for now if you save your code in the current formatting it will format correctly in later versions of QB64. If the code you have is 'corrupted' by autoformatting, then please report it on the forums, because that would be a serious issue, if you can you should also provide code example of how it was corrupted.

Autoformatting and Updating can be turned off in the IDE using the Options Menu!

(Return to FAQ topics)

Q: Does it work on Windows 98 or any OS older than Windows 2000?

A: No, not yet, it is a low-priority issue, since QB64 is made to run on new systems (WinXP -> Vista etc.), Galleon has said that he wants to make it work on Windows 98 too, so if you are patient it will eventually work there as well. It should work on NT, XP, 2000, Vista and Windows 7 using 32 or 64 bit systems. The .exe files produced by QB64 do work in Windows 98 as long as the QB64 DLL libraries are supported on that system.

QB64 also has versions for Linux and Mac OSX operating systems!

See the IDE Page for more information.

Q: Can Line Numbers be removed from older program code?

A: Yes, you can use the Microsoft program below or the program on the following page to remove line numbers that are not required by Basic keywords such as GOTO. See: Removing line numbers

Microsoft's REMLINE.BAS program removes unnecessary line numbers

(Return to FAQ topics)

Q: Does QB64 support CURRENCY values from PDS or VB programs?

A: Not directly, but _FLOAT currency values up to 4 decimal places can be multiplied by 10000(10 ^ 4) and converted to MKC$ string values using _MK$ with an _INTEGER64 value. _CV with an _INTEGER64 value divided by 10000 converts it back to _FLOAT values.

PUT can write a PDS or VB, 8 byte currency string by multiplying the currency amount by 10000 and using an _INTEGER64 variable.

GET can read a _FLOAT CURRENCY value as an INTEGER64 variable value divided by 10000.

See CURRENCY examples

(Return to FAQ topics)

Q: What files are required to run QB64 SDL programs in Windows?

A: The QB64 compiler and EVERY EXE file created by the compiler are dependant on various DLL Library files to function properly. These files are found inside of the QB64 folder. This also explains why QB64 will create ALL EXE files in the QB64 folder no matter where the original BAS file is located on the computer. Your new program will require these files too, but you can move the DLL files to your shared SYSTEM32 folder to eliminate duplicates! Note: As of version 0.94(9/8/2011), QB64 now includes the full GCC compiler.


The list of library files you need to include with your program(s) as of July 2010:

jpeg.dll libfreetype-6.dll libgcc_s_sjlj-1.dll *(.95) libogg-0.dll libpng12-0.dll libstdc++-6.dll *(.95) libtiff-3.dll libvorbis-0.dll libvorbisfile-3.dll SDL.dll SDL_image.dll SDL_mixer.dll SDL_net.dll SDL_ttf.dll smpeg.dll zlib1.dll * denotes DLL updated in (version)

Other Important Files:

cyberbit.ttf (12.7 MB v 0.92, October 2010)

NOTE: cyberbit.ttf file is a 12.7 megabyte font for rendering Unicode characters. Auto-update may be slow downloading this file!
This font is NOT required to be included with a program as QB64 can use other fonts when necessary.

It is suggested that frequent users copy the DLL files to the SYSTEM folder in Windows. The location should be:


This will allow all of your programs to run in any location without copies of the DLL files inside of every program folder. Administrator rights may be necessary to move them there! The DATA folder files are integrated into the compiler itself in versions .91 and above.

If you plan to make your program available for download, the DLL files listed above must be included with the program.

A ZIP file with all of the required files can be downloaded here:

QB64 Program Package ZIP file.

The ZIP file can be used to unzip the DLL libraries into any program's folder location. It can also be used to create program download packages. Just create a folder with all of the relevant program files needed by your program and unzip the required QB64 files into it. Then you can ZIP the folder or all of the folder contents into your own zip program packages. We hope to have a package installer in the future.

WARNING! You may need Administrator rights to install or use QB64!

The DATA folder and its contents ARE NO LONGER REQUIRED as of the 8/21/2010 version .91!
Files inside of the older version DATA folder.

charset8.raw chrset16.raw qb64.pal qb64ega.pal qb64icon

These files are no longer required and are no longer available except with older version downloads!

This page and download will be updated when library additions or requirements change!

(Return to FAQ topics)

Q: What are the Specifications by SDL Version?

AUTOMATIC VERSION UPDATES IMPORTANT: QB64 V0.91 users onwards do not need to download ANY Updates! Simply click on the QB64 FILE menu's UPDATE command (if QB64 hasn't already detected the new version) to download newer versions. You can allow or block automatic updates in the Options Menu. Enjoy, Galleon NOTE: Some auto-updates may take longer! Please allow them to finish completely. The Help menu About will tell which version of QB64 is currently running. The included Readme.txt file is also updated with the current version improvements. All QB64 versions after Version .94 will contain the full MinGW C++ compiler. Note: QB64 is currently being converted to Open GL graphics. When fully implemented, DLL files will no longer be required. Latest Update April 20, 2012 V0.954 Specific =============== -Implements the '_MEM' memory variable interface for safe, fast, raw memory access [1] -Patch applied for SHELL "consolecommand >somefile" in Win7 Professional (previously didn't work) NOTE: This version is the last SDL version and will be updated as required until GL is fully incorporated. V0.953 Specific =============== March 10, 2012 -New commands added to allow the use of a console window and hide or display the main program window: $CONSOLE _CONSOLE OFF/ON _DEST _CONSOLE $SCREENHIDE $SCREENSHOW _SCREENHIDE _SCREENSHOW -Codes can now be sent by END or SYSTEM in a program. END return_code SYSTEM return_code -The SHELL (function) and _SHELLHIDE function can return the END or SYSTEM code sent. return_code = SHELL("myprogram.exe") return_code = _SHELLHIDE("myprogram.exe") -A couple of bugs addressed V0.952 Specific =============== February 26, 2012 -First automated symultaneous multiplatform release of QB64 across Windows, Linux & MacOSX -Some bugs addressed -Simple console usage added. A console window will now appear briefly when the IDE is run. V0.951 Specific =============== February 18, 2012 -Implements a range of important bug/incompatibility fixes but no new functionality (see the bugs/incompatibilities forum for details) V0.95 Specific === Primarily implements significant improvements to the IDE: 1/18/2012 -IDE is ~2x faster at checking programs -Recently opened files list -Bulk comment and uncomment -Saved code bookmarks for navigation -ASCII chart (and value of cursor's ASCII character shown) -Quick search field ═0 along with a ↨ list of things recently searched for -CONTROL+left/right arrow to move between words of text in code -Double click text in a single line text field to clear it -Copy (CTRL+C or CTRL+INS) and paste (CTRL+V or SHIFT+INS) into/from single line text fields -Mouse wheel scrolls lists (such as file lists in the open box) -Can press keyboard keys to jump through list items (before it just gave the first one or in some cases didn't work at all) -View/open/edit/save files with any extension, not just .BAS -Backwards searching (SHIFT+F3) -When a code error is reported in the IDE you can click on the 'ON LINE 1022' part of the message (which is now highlighted) to jump to that location in your code -HOME key now toggles between the absolute left hand side (like before) on the first press and the first indented character of the line -Help system: -Linked to WIKI -Cached for speed but can be updated on request -F1 for help about a keyword (or symbol) the cursor is currently on in your code -Navigation ribbon for moving forward and backwards between recently viewed help pages -Typing a word quickly finds links on help pages (useful on large index pages) -Fully keyboard and/or mouse browsable -F6 to transition between help window and code window _SCREENIMAGE now supports four screen position parameters to get a portion of the desktop. _CONTROLCHR OFF sets all ASCII control characters(0 to 31) as text characters. ON resets. V0.94 Specific === September 10, 2011 Large Download will take about ONE HOUR through auto-update ! Download full MinGW C++ compiler V0.942 ZIP file update here for faster download! NOTE: After installing Version .94, Update to Version .942 from File menu! -DECLARE LIBRARY significantly improved: -_OFFSET integer variable type and _OFFSET (function) implemented for the storage of pointers and offsets which varies across systems/implementations and will grow in the future. -DECLARE CUSTOMTYPE LIBRARY, allows you to override the required types and use the variable types you want, provided they are the same size -DECLARE STATIC LIBRARY, for specifying static linking over shared library linking -Added DECLARE LIBRARY support to MacOSX & Linux including library versioning -SHELL _DONTWAIT and _SCREENIMAGE implemented in MacOSX & Linux -_FILEEXISTS and _DIREXISTS functions added to check for file & path existance -'Go to line', 'undo' & 'redo' added to IDE -Many bugs fixed, refer to bugs/incompatibilities forum -.'\internal\temp\recompile.bat/.sh/.command' batch/script file now autogenerated on run to investigate C++ compilation issues when they arrise -Note: Windows version of QB64 now distributed with the full (not stripped down) version of the MinGW C++ compiler. Update to v .942 after download and installation of v .94! V0.936 Specific =============== June 26, 2011 -Implements the QB64 device interface which can handle joystick, keyboard and mouse input in a common way by referring to buttons, axes & wheels: -New commands added: _DEVICES, _DEVICEINPUT and _DEVICE$ See: Example usage _AXIS, _BUTTON, _BUTTONCHANGE, _WHEEL, LASTAXIS, _LASTBUTTON, _LASTWHEEL -Implemented QBASIC's STICK, STRIG, STRIG(n) and ON STRIG(n) functionality: Example usage -Fixed problem with _CONNECTIONADDRESS returning 'localhost' IP (external site this function relied on changed their procedure). Will add optional $ suffix next release! V0.935 Specific =============== May 27, 2011 -Improvements to _MAPTRIANGLE -Clipping bugs which caused program to crash fixed -_MAPTRIANGLE _SEAMLESS ... option added so common edges aren't drawn twice, affecting alpha dependent results -Limits (-16383 to 16383) on coordinate positions imposed, as this is a software mapper for speed reasons it has some limitations -_SETALPHA fixed (was broken by syntax checking upgrade) V0.934 Specific =============== -Fixed the critical problem which made the IDE freeze/crash after a period of usage (Depending on the OS and RAM, the period could have been as short as a few minutes!) -Improved support MacOSX (Note: V0.933 was a Mac only version released via a link in the bugs/incompatibilities forum) -New command added: _MAPTRIANGLE Calling syntax: _MAPTRIANGLE (10,10)-(10,20)-(20,20)[,sourceimage] TO (10,10)-(10,20)-(20,20)[,destimage] What does it do? It texture maps a triangular region from the source image onto the destination image. What's supported: -8bit, 32bit, _CLEARCOLOR and _ALPHA Notes: A software mapper, but an extrememly fast one. Could easily be used to make an image rotator V0.932 Specific =============== This is an essential update which corrects problems added by V0.931 naming restrictions! -Implements a totally revised set of rules governing name restrictions which offers far greater QBASIC compatibility than V0.931 -Reports as yet unimplemented QBASIC commands as 'not implemented' when you try to use them -Bugs/Incompatibilities: -Indwelling $INCLUDE problem fixed -DELETE key after mouse click issue in IDE corrected -Phantom errors' after correction of an invalid sub/function argument declaration in IDE fixed Syntax for an off screen GET has changed to require a color parameter after the array name. V0.931 Specific ============ If you have this version PLEASE UPDATE to V0.932! -Implements robust syntax checking into all parts of the QB64 compiler: -Naming restrictions -Reserved name restrictions -Duplicate name restrictions -Checking for incorrect syntax -Checking all types match correctly for SUB/FUNCTION calls -and much more... -Minor bug-fixes/improvements [0.927] February 27, 2011 _SNDRAW interface added along with _SNDRAWLEN and _SNDRATE. (See http://www.qb64.net/forum/index.php?topic=2493.msg24885#msg24885) Multiplatform improvements: -Linux/MacOSX: Pop-up box on runtime errors -Linux/MacOSX: _CLIPBOARD$ uses OS's clipboard, very useful in QB64 IDE for cut/copy/paste operations -Linux: DELETE key now works correctly -MacOSX: Apple(Command)+X/C/V/A also supported in IDE -MacOSX: CTRL+BREAK now works (CTRL+F15 on keyboards without a designated 'break' key) -(Linux too?)/MacOSX: TIMER now begins on the correct value, before it always started on the same value which also made RANDOMIZE TIMER do nothing! Bugs/Incompatibilities: -Severe memory leak related to GET/PUT fixed [0.926] January 30, 2011 NOTE: This version reduces the size of QB64 compiled EXE files by as much as 44%! The minimum compiled EXE size has been reduced from 875 KB to 495 KB. Newly implemented QBASIC commands: KEY ON, KEY LIST, ON KEY(n)..., KEY(n) ON/OFF/STOP, KEY index,string$, etc PALETTE USING New commands added to QB64: _SCREENMOVE newwindowxposition,newwindowyposition _SCREENMOVE _MIDDLE 'center window on desktop mywindowxposition = _SCREENX 'set window's desktop position mywindowyposition = _SCREENY _MOUSEMOVE xoffset,yoffset 'moves the mouse cursor myosinfo$ = _OS$ (See http://www.qb64.net/forum/index.php?topic=2495.0) Critical bugs fixed in: PRINT USING - EOF - handling of NOT operator - passing multiple arrays to functions KILL - READ - Other minor problems addressed There is a new menu item in the 'Options' menu called 'About' which will tell you which version of QB64 you have. After this update it will say 0.926 V0.92 Updates October 17, 2010 [0.923] DECLARE LIBRARY command added to allow for calling functions in external libraries (http://www.qb64.net/forum/index.php?topic=1712.0) [0.923] Various minor bugs/incompatibilities fixed [0.922] QB64 IDE can now use codepages, select them in the options->language... section. Note: A .TTF font MUST be in use to see the results. [0.922] New command: _MAPUNICODE unicodevalue TO asciivalue 'Maps UNICODE codes to ASCII values for purposes such as simulating codepages [0.922] New command: unicodevalue=_MAPUNICODE(asciivalue) 'Returns the UNICODE code that the ascii value is currently mapped to [0.922] Linux version updated [0.922] Significant bugs/incompatibilities corrected, including: -corrections to the passing of UDT members by reference -fixed memory leak in _FREEIMAGE (as _FREEIMAGE is called internally by QB64 for SCREEN management, it also affected some programs not calling _FREEIMAGE) -corrected mismatch in dimension count of multidimensional arrays passed to functions -corrections to the implementation of the FIELD statement (for other bugs/incompatibilities addressed, refer to the forum) [0.921] Various bug fixes and patches applied to V0.92 V0.92 Specific October 4, 2010 -Significant improvements to the QB64 input system have occurred primarily for multilingual and multiplatform reasons: i) The new _KEYHIT and _KEYDOWN functions can be used to monitor key press/release events/states. These also return UNICODE (UTF32) codes when UNICODE characters are entered. http://www.qb64.net/forum/index.php?topic=1368.msg12703#msg12703 ii) IME support added to facilitate entering Japanese, Chinese and Korean characters. Note: The font CYBERBIT.TTF is free for non-commercial use and is now included in QB64. It is only required to facilitate input via IME and not loaded unless the user switches to an IME input system mode. QB64 also locates several fall-back fonts under circumstances when 'cyberbit' is not present, therefore it is unnecessary to distribute this font with your programs. iii) QB64 now maps the UNICODE input of characters which appear in the CP437 extended range(128-255) to their correct character. This means characters with umlauts and other international characters now appear correctly when using INKEY$ iv) QB64 emulates scancodes based on what a stock-standard 101-key keyboard might return. Scancodes are language/platform specific, so this change means programs which do use INP will work as expected on all platforms. -Support for the FIELD statement added. -Some bugs/incompatibilities addressed but others will be corrected over coming weeks via automatic updates. (See the bugs/incompatibilities forum for further information) V0.91 Updates August 22, 2010 -The DATA folder (and its contents) are no longer required. You may delete them when/if you wish. -Various bugs & incompatibilites addressed http://www.qb64.net/forum/index.php?board=3.0 (of note: FREEFILE, FIX, INT, INPUT, INCLUDE) -Improved syntax checking -Removed blank pixel lines occurring between box drawing characters when using .TTF fonts 7/8/2010: -FILES command implemented V0.91 Specific -Primarily implements the QB64 auto-updater. http://www.qb64.net/forum/index.php?topic=1110.msg8195#msg8195 QB64 now checks for and applies updates to QB64 automatically or according to the update options you specify in the IDE. V0.9 Specific July 11, 2010 (Linux users must now run the batch/script file 'setup.sh' to build/setup/install QB64) -Primarily updates Linux pure 64-bit support -C++ components have been overhauled to be 64-bit compatible (affects all versions of QB64) -Further bugs/incompatibilities fixed (see forum for details) -Samples have been checked for Linux compatibility (eg. case sensitive filenames)

(Return to FAQ topics)

Q: Does a User licence come with QB64?

A: Yes, as of version 0.85 a licence comes with QB64 released as freeware. Read the licence.txt that comes with the download package for more information. QB64 will always be free to use with the current library files and the licenses DO NOT LIMIT the use of those libraries! You are also allowed to sell software that you create with the following stipulations:

QB64 SDL SOFTWARE LICENSE QB64 is currently released as freeware meaning that this download may be copied/distributed free of charge. All rights to the programs you create using QB64 (in both their executable and source form) belong to you. You are under no obligation to release the source code to the programs you create. You can sell the programs you create for profit. You are under no obligation to acknowledge that the programs you create were written in QB64 or reference the QB64 website in any way. The dynamically linked libraries (the DLL files you must include with your programs) are distributed under LGPL. Requirements for this can be found at the following URL: http://www.libsdl.org/license-lgpl.php QB64 and QB64 programs dynamically link to SDL (Simple DirectMedia Layer) libraries. SDL libraries are made available under the GNU Lesser General Public License (LGPL). Details of the SDL license requirements can be found at the above URL. Libraries are used in their 'standard'/unmodified versions and source code for these libraries can be found at: http://www.libsdl.org The QB64 compiler generates C++ code which is compiled into executable form by the MINGW GCC compiler. QB64 uses a version of the MINGW & GCC compilers found at the following URL: http://www.drangon.org/mingw/ The official version of MINGW GCC compiler can be found at the following URL: http://www.mingw.org/

The choice of license makes a big difference: using the Lesser GPL permits use of the library in proprietary programs; using the ordinary GPL for a library makes it available only for free programs.

QB64 GL License found in the License folder with other licenses:

IMPORTANT LICENSING NOTE FOR QB64 GL PROGRAMMERS All executables which perform any kind of sound operation are subject to the LGPL license (due to incorporation of mpglibdll and OpenAL). Other components are licensed under various permissive licences. When sound components are included (thus the LGPL is in effect), the easiest way to meet terms of the LGPL is to make your program's source code (.BAS) available. If you are not using sound components, you do not need to release the program's source. If you are using fonts, you are bound by the terms of FreeType's license. Somewhere in your software package should include a notice that your program includes the FreeType library (see licence_freetype_ftl.txt for details) In all cases, you should distribute the LICENSE folder with your program. It should be noted that providing source code is not the only way to meet the conditions of the LGPL (eg dynamic linking) but it is by far the easiest from a technical point of view at this current time. The license requirements for components of QB64 are as follows: Software/Library Name: QB64 (inclusive of all parts of this distribution not covered by separate licence below) Website(s): http://www.qb64.net, http://code.google.com/p/qb64/ License: LGPL with static linking of code required for generated programs to run permitted License Website: http://www.gnu.org/licenses/licenses.html#LGPL License File: license/lgpl_2_1.txt Software/Library Name: MinGW 64 Website: http://mingw-w64.sourceforge.net/ License: (see below) Each of the various packages, which is distributed by MinGW.org, is governed by its own individual copyright and licensing terms. In summary, for the most commonly deployed packages: MinGW runtime: The MinGW base runtime package has been placed in the public domain, and is not governed by copyright. This basically means that you can do what you like with the code.w32api: You are free to use, modify and copy this package. No restrictions are imposed on programs or object files linked with this library. You may not restrict the the usage of this library. You may distribute this library as part of another package or as a modified package if, and only if, you do not restrict the usage of the portions consisting of this (optionally modified) library. If distributed as a modified package, then a copy of this notice must be included. This library is distributed in the hope that it will be useful, but WITHOUT WARRANTY OF ANY KIND; without even the implied warranties of MERCHANTABILITY or of FITNESS FOR A PARTICULAR PURPOSE. MinGW profiling code: MinGW profiling code is distributed under the terms of the GNU General Public License. Binutils, GCC, GDB, GNU Make: All of the GNU development tools, such as GNU binutils, GCC, GDB and GNU Make, are governed by the terms of the GNU General Public License. License Website: http://www.gnu.org/licenses/licenses.html#GPL License File: license_gnu_gpl_3.txt Location in QB64 distribution: internal/c/c_compiler/ Software/Library Name: Opus Tools Website: http://www.opus-codec.org/ License: BSD 2-clause license License Website: http://opensource.org/licenses/BSD-2-Clause License File: license_opus.txt Location in QB64 distribution: internal/c/parts/audio/conversion/ OpusInfo, which is under a GPL licence, was included in Opus Tools but has been removed from the QB64 distribution. Software/Library Name: mpglibdll Website(s): http://www.rz.uni-frankfurt.de/~pesch http://www.mpg123.de http://www.sulaco.org/mp3 License: LGPL 2.1 License Website: http://www.gnu.org/licenses/licenses.html#LGPL License File: license_gnu_lgpl_2_1.txt Location in QB64 distribution: internal/c/parts/audio/decode/mp3/ Software/Library Name: Ogg Vorbis I audio decoder version 1.05 Website:http://nothings.org/stb_vorbis/ Date:Written in April 2007 Author:Sean Barrett, sponsored by RAD Game Tools License: Placed in the public domain April 2007 by the author: no copyright is claimed, and you may use it for any purpose you like. License Website: N/A - public domain License File: license_stbvorbis.txt Location in QB64 distribution: internal/c/parts/audio/decode/ogg/ Software/Library Name: OpenAL-soft Website:http://kcat.strangesoft.net/openal.html License: LGPL 2 License Website: http://www.gnu.org/licenses/licenses.html#LGPL License File: license_gnu_lgpl_2.txt Location in QB64 distribution: internal/c/parts/audio/out/ Software/Library Name: FreeGLUT Website: http://freeglut.sourceforge.net/ License: LGPL (note: website states LGPL, license file is not a copy of GNU LGPL) License Website: http://www.gnu.org/licenses/licenses.html#LGPL License File: license_freeglut.txt Location in QB64 distribution: internal/c/parts/core/ Software/Library Name: FreeTYPE Website: http://www.freetype.org/ License: GPL or FreeTYPE's FTL (programs must abide by one of these licenses) License Website(s): (see below) http://www.freetype.org/license.html http://www.gnu.org/licenses/licenses.html#GPL License File(s): (see below) license_freetype_ftl.txt license_gnu_gpl_2.txt Location in QB64 distribution: internal/c/parts/video/font/ttf/ Software/Library Name: NanoJPEG - KeyJ's Tiny Baseline JPEG Decoder Author: Martin J. Fiedler <martin.fiedler@gmx.net> License: (refer to license file) License File: nanojpeg_license.txt Location in QB64 distribution: internal/c/parts/video/image/decode/jpg Software/Library Name: NanoJPEG - KeyJ's Tiny Baseline JPEG Decoder Author: Martin J. Fiedler <martin.fiedler@gmx.net> License: (refer to license file) License File: license_nanojpeg.txt Location in QB64 distribution: internal/c/parts/video/image/decode/jpg Software/Library Name: LodePNG License: (refer to license file) License File: license_lodepng.txt Location in QB64 distribution: internal/c/parts/video/image/decode/png

The creator of QB64 is NOT responsible for any damages or the intended use of the software it creates!
The user assumes all risk when they download or use the QB64 compiler!

(Return to FAQ topics)

Q: How can I find what caused a Compiler error?

A: Compiler errors are often actually coding errors that both you and the IDE don't notice! Often it is a syntax error such as forgetting a quotation mark in a PRINT. Look for syntax errors too as the IDE still needs some improvements. The best way to get a clue to the problem is to run the following batch file IMMEDIATELY AFTER a compilation failure: CODE UPDATED 1/4/2011

It's a good idea to exclude "QB64.exe" from any real-time anti-virus scanning to prevent IDE Module Errors!
Displays errors in a DOS Console window

@echo off ECHO. ECHO Diagnosing Latest Compilation Error ECHO. ECHO Please wait... ECHO. cd .\internal\c .\bin\g -w -Wall -I.\i -I..\..\ -L.\l qbx.cpp libqbx.o -mwindows .\i686-w64-mingw32\lib\libimm32.a -lwinspool -lmingw32 -ln -lmix -limg -lttf -lmn -lSDL -o ..\..\test64.exe cd ..\.. ECHO. ECHO. PAUSE

Note: Make sure that test64.exe is at the end of the long code line when copying!

Places compiler errors into the 0utput64.txt file

@echo off ECHO. ECHO Diagnosing Latest Compilation Error ECHO. ECHO Please wait... ECHO. cd .\internal\c .\bin\g -w -Wall -I.\i -I..\..\ -L.\l qbx.cpp libqbx.o -mwindows .\i686-w64-mingw32\lib\libimm32.a -lwinspool -lmingw32 -ln -lmix -limg -lttf -lmn -lSDL -s -o ..\..\ >..\..\0utput64.txt 2>&1 cd ..\.. ECHO. ECHO 0utput64.txt created! ECHO. PAUSE

Note: Make sure that 0utput64.txt 2>&1 is at the end of the long code line when copying!

To create the Batch file, copy code above to Notepad and save it as QB64ERR.BAT. Save as type: All Files.

Download the QB64 Editor and Compiler Shortcuts and Compile Error Batch Files

Look for the word error in the resulting information. The errors often have to do with syntax or code errors not found by the IDE.

Place the batch files into the QB64 folder to use.

(Return to FAQ topics)

Q: How do I use the QB64 code Repository?

A: You can find a video tutorial here: Repository Video Tutorial

I cannot stress enough that the QB64 repository is not an official QB64 release! Even though our contributors are individually appointed, I'm not responsible for the contributions of these other authors which could potentially be malicious.

(Return to FAQ topics)

Q: where I can view the C++ code before it gets compiled

Look in the QB64 internal\temp folder for Main.txt to get the C code used to compile the latest program.

Q: Where can I find information about a QB64 statement or function?

Known QB64 Issues

QB64 Forum (Forum Tips)

QB64 Tutorials

Appendix of QB64 Procedures

Information about Programming concepts

Keywords currently not supported by QB64

Keywords Not Supported in Linux or MAC OSX versions

Offline WIKI Download provided by OlDosLover:

Download the QB64 WIKI for Offline Reference (7 Zip 5MB).

Keyword Reference - Alphabetical
Keyword Reference - By Usage
Main Wiki Page